top of page
RENTAL
MIG/MAG
TRANSSTEEL RANGE
Mains voltage: 380V/400V
Duty cycle: 300A/40%
Mains operation: 3-phase
- Multiprocess device – three processes that offer the same high standard
- Switching between processes takes less than a minute
- Ready to weld in three steps
- Up to 118 welding characteristics for Steel, CrNi, CuSi, rutile FCW, metal-cored,
self-shielded, AlMg5, AlSi5
- 70% less rework with the Pulse and Synchro-Pulse mode
- Faster welding speeds on thicker materials
Mains voltage: 3 x 380V/400V/460V
Duty cycle: 500A/40%
Mains operation: 3-phase
- Ready to weld in three steps
- Controlled and fast pulse welding
- Suitable for wire diameters from 0.8 – 1.6mm
- Five freely configurable EasyJobs
- Steel, CrNi, AlMg, AlSi, Metal Cored, Rutil FCW, Basic FCW, Self-shielded
- Fully digital multiprocess synergic inverter
TRANSTIG
TRANSTIG RANGE
TRANSTIG 2500
FRONIUS
TIG/MMA
Mains voltage: 3X 400V
Duty cycle: 250A/50%
Mains operation: 3-phase
- Weighing only 24 kg, the TransTig 2500 is among the lightest TIG power sources with a three-phase power supply. Its ease of use and robust design round off the overall package perfectly.
- With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.
- The touchless and gentle high-frequency ignition is the easiest option for igniting the arc.
- Touchdown ignition can be used in particular for sensitive application areas. This allows electromagnetic interference, which can occur during HF ignition, to be avoided.
- The touchless and gentle high-frequency ignition is the easiest option for igniting the arc.
bottom of page