ABICOR BINZEL MIG/MAG WELDING TORCHES
MIG/MAG MANUAL WELDING TORCHES
MB EVO WELDING TORCHES
With their tried and tested torch technology and proven design, torches of the MB EVO series are the ideal solution for everyone looking for a robust, reliable torch with a very good price-performance ratio. Thanks to their ergonomic design, they form a perfect unit with the welder‘s hand. Thus, they permanently ensure the best welding results even under rough operating conditions.
MB EVO advantages
- Maximum service life and proven MB wear part concept
- Easy-to-repair design, simplest maintenance
- Robust 2-component handle
- Ergonomic design for best handling in any position
550 A
UP TO
MB EVO: GAS-COOLED
MB EVO: LIQUID-COOLED
MB EVO PRO WELDING TORCHES
The torch series MB EVO PRO is the established standard for demanding industrial welding. The torches are optionally available in air or liquid cooled versions. Air cooled MB EVO PRO torches with the particularly light BIKOX LW cable assembly enable relaxed welding in any position. Due to the cooler frontend, liquid cooled MB EVO PRO torches offer especially long service lives and additional power reserves. All MB EVO PRO torches are excellent to handle and fit perfectly in the hand.
MB EVO PRO advantages
- Maximum service life and proven MB wear part concept
- Lightweight BIKOX LW cable assembly takes the strain off the welder
- Robust ergonomic 2-component handle
- Easy-to-repair design, simplest maintenance
- Remote control modules optionally available
500 A
UP TO
MB EVO PRO: GAS-COOLED
MB EVO PRO: LIQUID-COOLED
ABIMIG GRIP WELDING TORCHES
Torches of the liquid cooled ABIMIG GRIP series show their strengths in the high power range and impulse welding. Their dual-circuit cooling system cools the torches reliably at all times, even when welding long seams at high power. This protects the torches and ensures particularly long service lives as well as reduced replacement costs. Thanks to standard wear parts of the MB series, the variety of parts and storage costs are reduced. ABIMIG GRIP torches are optionally available with screw-on gas nozzle and various remote control modules.
ABIMIG GRIP advantages:
- Particularly long service lives due to the dualcircuit cooling system
- Economical stock-keeping due to MB wear parts
- Optimal balance thanks to handle with ball joint
- Comfortable operation due to remote control modules on the handle (optional)
- Screw-on gas nozzle TS (optional)
550 A
UP TO
ABIMIG GRIP: LIQUID-COOLED
Definition:
T = turnable/exchangeable torch neck
LW = lightweight cable assembly
ABIMIG A T LW WELDING TORCHES
Changing welding positions and different welding tasks are the speciality of the ABIMIG® A T LW torches. The torches have an unbeatable power-to-weight ratio. With 360-degree rotatable and exchangeable torch necks and a super lightweight BIKOX LW cable, they enable ergonomic working in every position. And thanks to numerous additional components, ABIMIG A T LW torches can be easily adapted to different welding tasks.
ABIMIG A T LW advantages
- Handles available in two sizes (standard and small)
- Quick-change torch neck, reduced service costs
- Universal contact tip holder instead of gas diffusor for reduced wear part costs
- Longer service life thanks to screw-on, thermally insulated gas nozzle
- Rotatable and exchangeable torch necks
- Lightweight BIKOX LW cable assembly
400 A
UP TO
ABIMIG A T LW: GAS-COOLED
ABIMIG A T 155 LW
ABICOR BINZEL
MIG-MAG
Rating: 190 A CO2
: 180 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.0 mm
Product Code:
006D821 - 3M SHORT TRIGGER
006D810 - 3M LONG TRIGGER
006D822 - 4M SHORT TRIGGER
006D811 - 4M LONG TRIGGER
006D823 - 5M SHORT TRIGGER
006D812 - 5M LONG TRIGGER
006D804 - TORCH NECK
ABIMIG A T 255 LW
ABICOR BINZEL
MIG-MAG
Rating: 240 A CO2
: 220 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
004D880 - 3M SHORT TRIGGER
004D850 - 3M LONG TRIGGER
004D881 - 4M SHORT TRIGGER
004D851 - 4M LONG TRIGGER
004D882 - 5M SHORT TRIGGER
004D852 - 5M LONG TRIGGER
004D831- TORCH NECK
ABIMIG A T 305 LW
ABICOR BINZEL
MIG-MAG
Rating: 290 A CO2
: 260 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
018D953 - 3M SHORT TRIGGER
018D960 - 3M LONG TRIGGER
018D954 - 4M SHORT TRIGGER
018D961 - 4M LONG TRIGGER
018D955 - 5M SHORT TRIGGER
018D962 - 5M LONG TRIGGER
014H356- TORCH NECK
ABIMIG A T 355 LW
ABICOR BINZEL
MIG-MAG
Rating: 340 A CO2
: 320 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 1.0 – 1.6 mm
Product Code:
014H509 - 3M SHORT TRIGGER
014H390 - 3M LONG TRIGGER
014H510- 4M SHORT TRIGGER
014H391 - 4M LONG TRIGGER
014H511 - 5M SHORT TRIGGER
014H392 - 5M LONG TRIGGER
014H363 - TORCH NECK
PULLMIG WELDING TORCH
MHP 280i PullMig G
FRONIUS
MIG-MAG
- Welding current (ArCO2)
- MIG/MAG 40/100% D.C.: 280/170 A
- Wire diameter: 0.8 – 1.6 mm
- Hosepack length: 5.85/7.85/9.85 m
Product Code:
4,047,784 - MHP 280i G PM/FSC/5,85m/LED
4,051,041 - MHP 280i G PM/FSC/7,85m/LED
4,047,787 - MHP 280i G PM/FSC/9,85m/LED
4,047,785 - MHP 280i G PM/FSC/UD/5,85m/LED
4,051,043 - MHP 280i G PM/FSC/UD/7,85m/LED
4,047,788 - MHP 280i G PM/FSC/UD/9,85m/LED
4,047,786 - MHP 280i G PM/FSC/JM/5,85m/LED
4,051,042 - MHP 280i G PM/FSC/JM/7,85m/LED
4,047,789 - MHP 280i G PM/FSC/JM/9,85m/LED
MHP 280i PullMig G CMT
FRONIUS
MIG-MAG
- Welding current (ArCO2)
- MIG/MAG 40% D.C.: 280 A
- CMT 40% D.C.: 180 A
- Wire diameter: 0.8 – 1.6 mm
- Hosepack length: 3.85/5.85/7.85
Product Code:
4,051,073 - MHP 280i G PM CMT /FSC/3,85m
4,047,790 - MHP 280i G PM CMT /FSC/5,85m
4,047,793 - MHP 280i G PM CMT /FSC/7,85m
4,051,074 - MHP 280i G PM CMT /FSC/UD/3,85m
4,047,791 - MHP 280i G PM CMT /FSC/UD/5,85m
4,047,794 - MHP 280i G PM CMT /FSC/UD/7,85m
4,051,075 - MHP 280i G PM CMT /FSC/JM/3,85m
4,047,792 - MHP 280i G PM CMT /FSC/JM/5,85m
4,047,795 - MHP 280i G PM CMT /FSC/JM/7,85m
ABIMIG A T 405 LW
ABICOR BINZEL
MIG-MAG
Rating: 400 A CO2
: 370 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 1.0 – 1.6 mm
Product Code:
015D101- 3M SHORT TRIGGER
015D070 - 3M LONG TRIGGER
015D102 - 4M SHORT TRIGGER
015D071 - 4M LONG TRIGGER
015D103 - 5M SHORT TRIGGER
015D072 - 5M LONG TRIGGER
015D082 - TORCH NECK
Definition:
T = turnable/exchangeable torch neck
LW = lightweight cable assembly
ABIMIG A LW WELDING TORCHES
ABIMIG A LW torches won‘t break that easily. The particularly robustly built torches with double-fixed torch neck are optimally protected against mechanical influences. Despite their sturdy design, they are especially easy to handle. The extra lightweight BIKOX LW cable assembly reduces the weight and the optionally available remote control modules Up/Down, cross switch or rotary potentiometer allow quick adjustments.
ABIMIG A LW advantages
- Particularly robust thanks to double torch neck fixation
- Lightweight cable assembly relieves the welder
- Comfortable due to selectable trigger length and remote control modules (optional)
- Universal contact tip holder for reduced wear part costs
- Longer service life due to screw-on, thermally insulated gas nozzle
- Optional remote control modules
400 A
UP TO
ABIMIG A LW: GAS-COOLED
ABIMIG A 155 LW
ABICOR BINZEL
MIG-MAG
Rating: 170 A CO2
: 170 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.0 mm
Product Code:
7670030 - 3M SHORT TRIGGER
7670062 - 3M LONG TRIGGER
7670031 - 4M SHORT TRIGGER
7670063 - 4M LONG TRIGGER
7670032 - 5M SHORT TRIGGER
7670064 - 5M LONG TRIGGER
7670024 - TORCH NECK
ABIMIG A 255 LW
ABICOR BINZEL
MIG-MAG
Rating: 230 A CO2
: 220 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
7670033 - 3M SHORT TRIGGER
7670065 - 3M LONG TRIGGER
7670034 - 4M SHORT TRIGGER
7670066 - 4M LONG TRIGGER
7670035 - 5M SHORT TRIGGER
7670067 - 5M LONG TRIGGER
7670027 - TORCH NECK
ABIMIG A 305 LW
ABICOR BINZEL
MIG-MAG
Rating: 280 A CO2
: 260 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
7670036 - 3M SHORT TRIGGER
7670068 - 3M LONG TRIGGER
7670037 - 4M SHORT TRIGGER
7670069 - 4M LONG TRIGGER
7670038 - 5M SHORT TRIGGER
7670070 - 5M LONG TRIGGER
7670045 - TORCH NECK
ABIMIG A 355 LW
ABICOR BINZEL
MIG-MAG
Rating: 330 A CO2
: 310 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 1.0 – 1.6 mm
Product Code:
7670039 - 3M SHORT TRIGGER
7670071 - 3M LONG TRIGGER
7670040 - 4M SHORT TRIGGER
7670072 - 4M LONG TRIGGER
7670041 - 5M SHORT TRIGGER
7670073 - 5M LONG TRIGGER
7670050- TORCH NECK
ABIMIG A 405 LW
ABICOR BINZEL
MIG-MAG
Rating: 400 A CO2
: 350 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 1.0 – 1.6 mm
Product Code:
7670042 - 3M SHORT TRIGGER
7670074 - 3M LONG TRIGGER
7670043 - 4M SHORT TRIGGER
7670075 - 4M LONG TRIGGER
015D103 - 5M SHORT TRIGGER
7670076 - 5M LONG TRIGGER
7670055 - TORCH NECK
Definition:
T = turnable/exchangeable torch neck
ABIMIG W T WELDING TORCHES
Flexible all-rounders: Thanks to their rotatable and exchangeable torch necks, torches of the ABIMIG W T series are extremely versatile. The wide selection of torch necks with different lengths and geometries ensures that even hard-to-access welding areas can be easily reached. Thanks to the compact design of the front end, they ensure a clear view of the welding process – regardless of the position. All available necks with the different power class 340, 440 and 540 can be used with the same base torch.
ABIMIG W T advantages
- Powerful, liquid cooled torches
- Quick-change torch neck, reduced service times
- Flexible thanks to the rotatable torch necks in many lengths and shapes
- Small front end for optimal view of the process
- Longer service life thanks to gas nozzles with anti-spatter protection
- One base torch for all power classes (340, 440 and 540)
550 A
UP TO
ABIMIG W T: LIQUID-COOLED
ABIMIG W T 340
ABICOR BINZEL
MIG-MAG
Rating: 400 A CO2
: 350 A Mixed gas M21*
Duty cycle: 100 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
7880041 - 3M SHORT TRIGGER
7880116 - 3M LONG TRIGGER
7880042 - 4M SHORT TRIGGER
7880117 - 4M LONG TRIGGER
7880043 - 5M SHORT TRIGGER
7880118 - 5M LONG TRIGGER
7880020 - TORCH NECK
7880044 - 3M SHORT TRIGGER
7880119 - 3M LONG TRIGGER
7880045 - 4M SHORT TRIGGER
7880120 - 4M LONG TRIGGER
7880046 - 5M SHORT TRIGGER
7880121 - 5M LONG TRIGGER
7880005 - TORCH NECK
ABIMIG W T 540
ABICOR BINZEL
MIG-MAG
Rating: 550 A CO2
: 500 A Mixed gas M21*
Duty cycle: 100 %
Wire diameter: 1.0 – 1.6 mm
Product Code:
7880047 - 3M SHORT TRIGGER
7880122 - 3M LONG TRIGGER
7880048 - 4M SHORT TRIGGER
7880123 - 4M LONG TRIGGER
7880049 - 5M SHORT TRIGGER
7880124 - 5M LONG TRIGGER
7880026 - TORCH NECK
ABIMIG W WELDING TORCHES
The compact, liquid cooled ABIMIG W torches with coated torch necks are ideally suited for welding with high welding currents and process temperatures. Thanks to the double-fixed torch necks they are robust in application. The compact front end allows a good view of the process. ABIMIG W torches can be equipped with additional remote control modules on the handle if required.
ABIMIG W advantages
- Particularly robust thanks to double torch neck fixation
- Powerful, liquid cooled torches
- Coated, screw-on nozzles with anti-spatter protection for long service lives
- High working comfort due to ergonomic handle
550 A
UP TO
ABIMIG W: LIQUID-COOLED
ABIMIG W 340
ABICOR BINZEL
MIG-MAG
Rating: 400 A CO2
: 350 A Mixed gas M21*
Duty cycle: 100 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
7661530 - 3M SHORT TRIGGER
7661558 - 3M LONG TRIGGER
7661531 - 4M SHORT TRIGGER
7661559 - 4M LONG TRIGGER
7661532 - 5M SHORT TRIGGER
7661560 - 5M LONG TRIGGER
7661553 - TORCH NECK
PUSH-PULL PLUS WELDING TORCHES
When welding thin aluminum or stainless steel wires, sensitivity is required. This is where torches of the Push-Pull Plus series are right in their element. They feed wires particularly gently and evenly. Thus, they are ideally suited for welding with sensitive wires and long cable assemblies. The speed of the powerful pull motor can be precisely adjusted via an optional potentiometer. The screwable torch necks, which can be rotated 360 degrees, ensure good welding comfort and short set-up times.
Push-Pull Plus advantages
- High-torque pull motor ensures consistent wire feed
- Contact pressure regulation directly at the torch
- Economical stock-keeping thanks to MB wear parts
- Ergonomic handle for fatigue-free welding
- Versatile use with gas or liquid cooling
400 A
UP TO
PUSH-PULL PLUS: GAS-COOLED
PUSH-PULL PLUS 36 D
ABICOR BINZEL
MIG-MAG
Rating: 300 A CO2
: 270 A Mixed gas M21*
Duty cycle: 60 %
Wire diameter: 0.8 – 1.2 mm
Product Code:
0850104 - STRAIGHT 8M WITHOUT POTI
0850106 - STRAIGHT 8M WITH POTI
0850116 - STRAIGHT TORCH NECK
0850105 - 45° BENT 8M WITHOUT POTI
0850107 - 45° BENT 8M WITH POTI
0850117 - 45° BENT TORCH NECK
PUSH-PULL PLUS: LIQUID-COOLED
PUSH-PULL PLUS 401 D
ABICOR BINZEL
MIG-MAG
Rating: 400 A CO2
: 350 A Mixed gas M21*
Duty cycle: 100 %
Wire diameter: 0.8 – 1.2 mm